2 sided planer GT-610B
GT-610B 2 sided planer
• Working width 610mm(24").
• Suitable for planning short workpieces.
• Equipped with a plain cutterhead.
• Feeding inverter with an additional reducer
STANDARD ACCESSORIES:
• Well laid-out pressure spikes
• Fast knife replacement
• Fast and convenient belt tension adjustment.
• Automatic lubricator
• Feeding inverter
• Gear reducer
• Quick thickness setting(standard equipment on models GT-610A and GT-635ARD only Optional for other models)
• Rear control device
• Centralized hand lubricator(standard equipment on models GT-610A and GT-635ARD only Optional for other models)
• The three table rollers provide superior feeding performance
• Standard Y-delta motor starting
• Quick belt change for bottom cutterhead
• Automatic lubrication for feeding chain
• Automatic lubricator provides convenient lubrication to caterpillar chain slideways(optional)
• An air wrench is applied for removing or installing knives and saves knife change time
• Optional spiral cutter head for the upper and lower cutter heads
• The table surface is hard chrome plated and precision ground for extremely smooth feeding and maximum wear resistance
• The dovetailed slideways on the table elevation assure outstanding rigidity and stability
• Sectional infeed rollers
|
|
Well Laid- out pressure spikes
|
The pressure spikes are in an overlapped layout with a minimum of gaps that hold the workpiece firmly and evening ensuring shake-free feeding, even for short workpiece.
|
|
|
Gear reducer
|
Reduce wear caused by temperature rise and improve efficiency of power transmission.
|
|
|
Fast knife replacement
|
The bottom cutterhead can be conveniently pulled out and is combined with an air wrench for greatly saving knife change time.
|
|
|
Automatic lubricator
|
The automatic lubricator delivers frequent lubrication oil to the caterpillar chain.
|
|
|
Feeding inverter
|
Digital display and quick operation to reduce wear on mechanical gearbox.
|
|
|
Rear control device
|
Instant response and emergency stop to any abnormality, or just to stop/start the feeding, and provide the operator at the rear to perform on-site height adjustment of machine.
|
Specification
Model
|
GT-610B
|
Maximum Width Of Cut
|
610mm ( 24" )
|
Maximum Thickness Of Cut
|
200mm ( 8" )
|
Minmum Thickness Of Cut
|
8mm
|
Minmum Lenght Of Cut
|
250mm
|
Knife Nos. On Bottom Cutterhead
|
4pcs
|
Knife Sizes
|
610x3x30mm(24"x1/8"x1-1/8")
|
Cutterhead Diameter
|
ø101mm
|
CutterHead Speed
|
4000RPM
|
Variable Feed Speed
|
8-24m/min
|
Dust Hood Outlet Diameter
|
5" x 2
|
Table Surface Area
|
27"x86"
|
Top Cutterhead Drive Motor
|
15HP
|
Buttom Cutterhead Drive Motor
|
10HP
|
Feed Drive Motor
|
2HP
|
Upper Mechanism Elevation Motor
|
1/2HP
|
Machine Dimensions(LxWxH)
|
2200x1100x1720mm
|
Net Weight
|
2500kg
|
Packing Dimensions(LxWxH)
|
2350x1240x1940mm
|
Gross Weight
|
3000kg
|
※ To ensure technological excellence, specifications are subject to change without prior notice。