Multiple Spindle Oscillation Mortiser YOM-3-3L
Outstanding Features:
-
1.This highly productie mortiser is designed for producing multiple mortises simultaneously. High efficiency and high throughput.
-
2.Double tables built on front and back sides, permitting both sides operations for increased efficiency.
-
3.Each carriage is adjusted independently.
-
4.Carriages slide on high precision linear guide ways. Maximum motion stability and smoothness are assured when cutter oscillates at high speed.
-
5.Mortise width and depth are adjustable.
-
6.The machine is designed for both mortising and drilling functions.
-
7.Carriages are well constructed for adjusting width independently.
-
8.Workpiece clamping mechanism suits various profiles of workpiece
|
• 1 set horizontal carriage
• 2 sets tilting carriages
|
|
Mortising Head
-
Mortising head is directly driven by an independent 1.8HP motor. Two cutters fitted on both ends of spindle perform both sides mortising simultaneously.
-
Mortising head position can be adjusted in right/left, up/down directions.
-
Collet chuck clamps /unclamps the cutter for quick tool change.
|
|
Carriage
-
The machine is constructed of three tilting carriages and one horizontal carriage. Each carriage can be fitted with one or two mortising head as customer's requirement.
-
Each carriage can be tilted independently. Maximum tilting angle is 20°.
-
Picture shown model YOM-4 is equipped with three tilting carriages and one horizontal carriage.
|
|
Variable Cutter Speed
-
The cutter running is controlled by a high performance frequency inverter, permitting for variable speeds adjustment. Wide speed range is from 6,000 to 12,000 RPM.
|
|
Control Panel
All of machine motions are grouped in one control panel for operation convenience, including cutter oscillation, motor ON/OFF control, and clamping cylinder control etc.
|
Specification
Model
|
YOM-3-3L
|
Numbers of carriage
|
3 sets
|
Numbers of spindle
|
5 spindle
|
Max. mortise width
|
100 mm
|
Max. mortise depth
|
50 mm
|
Cutter diameter
|
Ø6~Ø25 mm
|
Cutter shank diameter
|
Ø16 mm
|
Distance between spindles
|
45~760 mm
|
Oscillation speed(2speeds)
|
190 strokes
|
Spindle speeds
|
4500~9000 R.P.M.
|
Tilted mortise angle
|
10°×1 / 20°×2
|
Spindle motor
|
3 HP
|
Tilted mortise angle
|
1.5 HP
|
Oscillation drive motor
|
5~6 kg/cm²
|
Working air pressure
|
Ø2-1/2"×2 / Ø4"×1
|
Net weight
|
1000 kgs
|
Gross weight
|
1200 kgs
|
Machine dimensions
|
1450×1650×1400 mm
|
Packing dimensions
|
1680×1650×1750mm
|
|
•Specifications and design characteristics are subject to change without prior notice.
|