Veneer veneer single-knife shearing machine
Item 7: Veneer veneer single-knife shearing machine
Model: CutMate Series
Mechanical specifications
Mechanical model: CutMate 3200 CutMate 2800
Shear length: 3200 mm 2800 mm
Discharge height: 120 mm 120 mm
Electricity: about 7.5 kw about 7.5 kw
Shear range: 25 ~ 650 mm 25 ~ 650 mm
Mechanical dimensions (L x W x H): 150 mm 150 mm
Fuel tank size (L x W x H): 5000 x 1750 x 1850 mm 4600 x 1750 x 1850 mm
Mechanical net weight (including fuel tank): approx. 4800 kg approx. 4450 kg
Body color: RAL 8019 / RAL 9003 RAL 8019 / RAL 9003
The
CutMate series of veneer single-knife shearing machine shears the veneer and
provides accurate cutting linearity and parallelism. It is also compatible with
the veneer veneer sewing machine series produced by our company. Sex. This
shearing machine is a technical cooperation between Longde Company and Danish
SAVI Company (SAVI is the largest manufacturer of veneer veneer shears in the
US) and is manufactured with high quality production of European 30-year veneer
shears. Paired with Longde veneer double-sided automatic gluing machine
GlueMate 700 and veneer veneer horizontal seaming machine UltiMate series
ensures the most perfect coating and splicing effect, and effectively improve
production efficiency.
Characteristics
Hands control the lower knife
60 mm cutter hydraulic cylinder
extra wide 150 mm pressure beam
Using Japan YUKEN (oil research) hydraulic system
Use the magnetic
ruler to measure the accuracy of the rear baffle position
Using Japan MITSUBISHI PLC control system
Laser safety
gratings are provided in front of the boring cutter and the pressure beam to
ensure the safety of use.
Sturdy body structure: Sturdy and stable body design ensures stable
and non-vibrating body when cutting
The underarm
knives and pressure beams are controlled by hydraulic transmission system, which
can adjust the pressure at appropriate time for various veneer veneers.
Green cutting
positioning line: The cutting position can be correctly displayed to precisely
control the cutting width, making the operation easier and less time-consuming
The structure
of the fuselage is fully in line with European safety standards. In addition to
cutting veneer veneer, it can also cut plastic, paper and other materials.
Safety oil
pressure valve: If any oil pressure action is performed for more than 30
seconds, the oil pressure valve will automatically close and return to the
original safety state to avoid damage to the oil pressure system caused by
long-time pressure on the oil pressure pipe.
The front of the
boring holder is equipped with a “cutting knife to prevent
accidental falling knife latching device”. This device
is automatically activated before each shearing action is performed. It is the
only shearing machine manufacturer on the market that uses this device.
Explosion-proof
oil pressure valve: It is installed on the cutter hydraulic cylinder. No matter
the machine causes oil leakage due to any factors, the “explosion-proof hydraulic pressure valve” will automatically close due to excessive instantaneous flow, completely
avoiding the accidental danger of cutting under the cutter.
Optional equipment
1. Secondary knife cutting process:
In view of the fact that the general hydraulic shearing machine shears hardwood on the market, it is easy to cause inaccurate shearing surface due to insufficient pressure. The veneer shearing machine produced by the company provides a secondary knife shearing process. When the pressure beam is pressed down the veneer, after the cutter is cut for the first time, it is automatically retracted by 1 mm (the girder is still pressed against the veneer), and then the second incision is cut to ensure that the cutting end face is 90. Degree, to achieve the best seaming effect (as shown), this process is especially suitable for the cutting of thicker or harder tree veneer.